New sequencer module is out!

For discussion of the Voltage Modular synthesis ecosystem.
Ian Craig
Posts: 83
Joined: Wed Jun 12, 2019 1:06 pm

Re: New sequencer module is out!

Post by Ian Craig »

Unfortunately it seems to be the most unreliable module I have come across. It keeps running, sticking needing retriggered and when set to repeat it might sometimes, other times not etc. I probably haven't grasped all the controls yet, so I'll have to try to understand it better. Otherwise I hope you can stabilise it's behaviour, because it would be a shame not to use it. :)
AMD Ryzen 8 Core 3.0 GHz,
2TB SSD etc, 40GB RAM,
Windows 10 Professional
Focusrite Scarlett 2i2 (Audio Interface)
Mixcraft 7,8 (& sometimes 9) Pro Studio
User avatar
marltetz
Posts: 88
Joined: Tue Feb 26, 2019 9:53 pm
Location: Tokyo, Japan
Contact:

Re: New sequencer module is out!

Post by marltetz »

It's a shame to me. I will find any strange behavior.
Would you share some details about the situation? Just unstable and difficult to reproduce?
User avatar
marltetz
Posts: 88
Joined: Tue Feb 26, 2019 9:53 pm
Location: Tokyo, Japan
Contact:

Re: New sequencer module is out!

Post by marltetz »

I found that the behavior of "Gate out" in [Step] mode become strange after doing [Play]. It will be fixed.
In addition, some behaviors related to those transport functions will be changed.

Sorry for the problem.
If you find any problems, please let me know.

Thanks,
Ian Craig
Posts: 83
Joined: Wed Jun 12, 2019 1:06 pm

Re: New sequencer module is out!

Post by Ian Craig »

Thanks, I'm not in good enough health at the moment to figure out how to describe problems properly, but at least you're looking at it, thanks. I'll eagerly await any updates. Thanks :D
AMD Ryzen 8 Core 3.0 GHz,
2TB SSD etc, 40GB RAM,
Windows 10 Professional
Focusrite Scarlett 2i2 (Audio Interface)
Mixcraft 7,8 (& sometimes 9) Pro Studio
User avatar
marltetz
Posts: 88
Joined: Tue Feb 26, 2019 9:53 pm
Location: Tokyo, Japan
Contact:

Re: New sequencer module is out!

Post by marltetz »

Some changes and fixing are coded and currently in testing phase.
An update will be submitted for a few days.

>Ian
Don't mind. :) Please take care.
User avatar
marltetz
Posts: 88
Joined: Tue Feb 26, 2019 9:53 pm
Location: Tokyo, Japan
Contact:

Re: New sequencer module is out!

Post by marltetz »

An update for Vari-step will be out soon. :)

*Build 22
- Now, "Play" button/CV just start sequences (not try to toggle Play/Pause).
- Now, "Pause" button/CV just pause sequences (not try to toggle Play/Pause).
- Output signals from Gate jacks now have length instead of a sample of trigger signals. The voltage is high up during the Step button is pushed down or voltage of Step CV input is positive.
- A switch for "Play" trigger mode is added.

Thanks,
dasmode
Posts: 27
Joined: Sun Jun 16, 2019 5:52 am

Re: New sequencer module is out!

Post by dasmode »

    Last edited by dasmode on Thu Jan 21, 2021 8:40 am, edited 1 time in total.
    User avatar
    marltetz
    Posts: 88
    Joined: Tue Feb 26, 2019 9:53 pm
    Location: Tokyo, Japan
    Contact:

    Re: New sequencer module is out!

    Post by marltetz »

    Sorry for the problem.
    It seemed to be happened in some higher note division settings.
    I check the cause of problem.
    Thanks for the report.
    User avatar
    marltetz
    Posts: 88
    Joined: Tue Feb 26, 2019 9:53 pm
    Location: Tokyo, Japan
    Contact:

    Re: New sequencer module is out!

    Post by marltetz »

    I found a mistake in the code and fixed it.
    An update is submitted for approval. Please wait...

    Sorry for these critical bugs on the product. I should put it more on testing cycle and will do so next.

    Thanks,
    dasmode
    Posts: 27
    Joined: Sun Jun 16, 2019 5:52 am

    Re: New sequencer module is out!

    Post by dasmode »

      Last edited by dasmode on Thu Jan 21, 2021 8:39 am, edited 2 times in total.
      Post Reply

      Return to “Voltage Modular”