Active MIDI inputs section can become too small

[Koshdukai]

Already mentioned this previously:

One other extremely annoying issue I was hoping 2.0 would solve is the Active MIDI input tiny list where it only shows 2 ports at a time.
Problem is, when trying to scroll it with a mouse-wheel, it skips some of the ports, so I'm unable to access those easily (the wheel's 1 tick equals more than 2 lines of the list)

Here's an example, where I'm unable to access MIDI Bus C:
Active MIDI inputs list issue.png

A bigger (taller) window with more lines showing would be appreciated, more usable and surely overcome this issue as a side-effect.

Edit: Currently, the only workaround I have is to click on one of the lines and then use the keyboard arrow keys

But I just realized the issue has another level to it.

Not sure why, today, VM 2.0.15 started with no ASIO device selected and probably because of that, the Active MIDI input had a generous size, making it (finally) perfectly usable.

Active MIDI inputs list issues.png (48.11 KiB) Viewed 6614 times

For a split second, my reaction was " YES!!! V.2.0.15 fixed this too!!! YAY!"
Then, when fixing the missing ASIO device, I realize that the issue is still there
So, it looks like, once the Active IO channels are listed (fortunately, minimum of 4 lines per list!) the Active MIDI inputs shrinks back to a 2 line list


So this might not be affecting everyone in the same way, but it's still annoying and not easy to use, in these cases.

[martb]

Don't know what's going on there but for me it looks like this:

midi_select.jpg (22.21 KiB) Viewed 6608 times

I always get the little scroll bar on the right.

[Koshdukai]

Don't know what's going on there but for me it looks like this:

midi_select.jpg

I always get the little scroll bar on the right.

Thanks. I expected to get that but I'm not getting it.

Maybe there's a bug where when reaching that size (2 lines) it won't even try to add a scroll bar, or maybe the vertical bar cursor gets so small that it doesn't show. I really don't know (only CA can).

It would be nice that that section could have a hard-limit to the minimum of lines listed (4 would be fine, I guess), since it already adds a vertical scroll bar to the whole Settings window anyway, when needed.

Active MIDI inputs list vertical scroll bars.png (59.09 KiB) Viewed 6602 times

[Cherry Garcia]

We'll look into this. Thanks for posting.

[terrymcg]

Thanks. I expected to get that but I'm not getting it.

Fwiw, I see the same behavior (now that I'm looking for it ).

[Koshdukai]

We'll look into this. Thanks for posting.

Thank you!

Thanks. I expected to get that but I'm not getting it.

Fwiw, I see the same behavior (now that I'm looking for it ).

ah! So I'm not alone!

[Koshdukai]

We'll look into this. Thanks for posting.

2.0.17 fixed this, thank you!

[Koshdukai]

Unfortunately, Voltage Modular 2.2.3 (or a recent version since 2.0.17) caused a regression on this and now the issue is back

[cherryaudio Greg]

Unfortunately, Voltage Modular 2.2.3 (or a recent version since 2.0.17) caused a regression on this and now the issue is back

Hi,

What are you seeing? Here's what I've got:

2021-02-12_114102.png (38.88 KiB) Viewed 5317 times

I plugged in another device just to get the scroll bar.

Greg

[Koshdukai]

Like before:

I'm seeing this again:

VM 2.2.3 Settings AudioMIDI.PNG (62.5 KiB) Viewed 5277 times

Meaning, if there's enough audio in and out ports (>3 + >3) and enough MIDI ports (>2) we fortunately get at least 4 lines height on the in/out audio ports but only 2 lines for the MIDI ports.

I think 2.0.17 fixed this by providing a taller overall Settings window or at least more "internal" window space to allow at least 4 + 4 + 4 lines of selection for the 3 lists (audio in, out and MIDI) even if that meant getting a window scroll-bar.

That "Active MIDI inputs:" selection list should at least show 4 lines (too) when there's more than 3 ports (or show 3 when there's more than 2).

Your example works fine because you don't have audio inputs and only 2 outputs so that leaves a lot of spare window space for the MIDI ports list, which is fine but this should be flexible enough to handle other use-cases, like my example.