Waverley Midistep-16 problem

[grumpe]

Hi guys.
I cannot get Midistep to output pitch or gate to Midinote.
The sequencer is running, lights flashing at top and on left side, but nothing on the rhs apart from swing flashing.
Obviously I'm missing something.
I'd greatly appreciate help!
Macbook M1, 12.2 VM 2.7
I have attached my patch screenshot

Screenshot 2023-07-25 at 09.28.06.png (1.68 MiB) Viewed 1557 times

[Waverley Instruments]

Hi there,

Rob @ Waverley Instruments here.

From the User Guide:

MIDISTEP-16 needs a MIDI note to start playing a sequence and this will usually come from the host, i.e. FROM HOST MIDI jack.

Connect Voltage Modular’s MIDI FROM HOST to the MIDI IN of MIDISYNC. If you intend using the internal clock in MIDISYNC, that’s all you need to do. If you want to sync to host, connect Voltage Modular’s SYNC OUT to the HOST SYNC jack of MIDISYNC. You can also connect the PLAY and STOP triggers if needed.

I think it's the connection highlighted above that you're maybe missing?

Regards, -Rob

[grumpe]

Cheers Rob. Missed that!